 |  | 
[ Home > Product Catalog > Bathroom Products > Grab Bars and Safety Rails > Stainless Steel Grab Bars and Safety Rails > Wall to Floor Grab Bars, Several Styles > Grab Bar, Wall to Floor, 30 x 33, with Outrigger ]
 
Grab Bar, Wall to Floor, 30 x 33, with Outrigger
Part# 220-402
(Left Side)
Part# 220-403 (Right Side)
-
Wall to floor 30 x 33, with outrigger
-
Dual floor mount outrigger allow for exceptional stability.
-
Choose either right or left hand models, the picture above is the left hand
model.
-
All prices are without flange trim plate, see info below about trim plates.
-
All of the stainless grab bars are made with 1.5" diameter tubing.
-
14 gauge thick, 3" diameter ends with three mounting holes.
-
Strong yet flexes during installation to reduce the possibility of tile cracking.
-
Pan headed mounting screws provided.
-
ADA approved.
-
Stainless Steel Trim Plates are available to cover the mounting flanges on
our stainless steel grab bars, the cost is $8 extra per flange that you need
to cover.
-
These flange covers are built in during manufacturing and can not be added
later.
-
Add as many to your shopping cart as you have flanges on you order.
-
For example if you order (2) 12" straight bars and want flange covers on
all four flanges add 4 of these to the shopping cart.
-
Click
here to go to the page with the flange cover upgrade.
*Note*
Must Be Standing In Front Of Commode
To Determine Left or Right Side.
Please measure carefully to ensure that you have sufficient
room to mount this item before placing order. This item is
shipped direct from the manufacture and this manufacture
does charge restocking fees.
|
|